Block paving is a popular option for many property owners due to its numerous advantages. One of the top reasons for its popularity is its versatility. Block paving comes in a wide range of colours and styles to suit the needs and specifications of every user.
It’s relatively easy to maintain elements of block paving in a property. One of the easiest ways to keep your block paving in good condition is routine block paving cleaning. Therefore, it is vital for homeowners to know how to clean block paving.
Steps for Cleaning Block Paving.
Remove all Items on the Paving.
Before the commencement of the cleaning exercise, make sure that you have removed all items, including pots and furniture on the block paving. By removing the items, there will be no dirty marks that will be left if you decide to move them the items at a later date.
Use a Broom to remove loose Dirt.
You can get rid of loose dirt on the block paving by using a stiff broom. Focus on corners and areas such as behind drainpipes and water drains. You can also use a leaf blower to make the work much easier.
However, a leaf blower can only be effective if there are no stones or large debris on the block paving. Stones and other large particles on block paving could cause massive damages, such as breaking glass windows when using a leaf blower.
Get rid of Weeds and Moss.
Consider using a weed killer to eliminate weeds that may be present near your block paving before you start cleaning. If you decide to use weed killers, ensure that you adhere to the manufacturer’s instructions.
Once you have applied the weed killer, wait for a few days for the weeds to die completely before you start block paving cleaning. The weeds will wilt after dying while moss will turn brown. Dead moss becomes loose and easier to clean.
Clean the Block Paving.
You can use soapy water or block paving cleaners for the exercise. If your block paving is too dirty, consider using special block paving cleaning agents. Soapy water is ideal if the dirt on the surface is light.
Scrub the Cleaning Agent gently.
Use a stiff broom to work the cleaning agents into the surface and joints of your block paving. Alternatively, you can use a pressure washer to scrub the surface of your paving. The washers are ideal for paving blocks that have ingrained dirt that is hard to remove.
Rinse the Surface using Clean Water.
Once you have finished brushing soapy water or the special block paving cleaning agents, use plenty of water to rinse the surface. Rinsing the surface helps to get rid of dirty water or cleaning agents and any remaining dirt particles.
Finally, once your paving block has dried completely, replace any sand that may have been lost during the cleaning exercise using paving joint sand. Keep adding the joint sand whenever necessary.
Are you considering hiring a driveway clean service in your area? There are several factors that you should consider to help you make an informed decision. For example, you should research online to find one of the best service providers near you. Also, ask for referrals from your friends and relatives.