Block paving is a very popular choice for many homeowners because it offers an attractive and long-term finish at a reasonable cost. With block paving,
there many options to choose from depending on the aesthetics of your house, there are different colours and styles.
Once your block paving driveway has been installed, you can expect a guarantee of up to five years.
However, it should be regularly cleaned in order to keep it looking good and preserving the integrety for as long as possible.
One of the Questions often Asked is “Can You Pressure Wash Block Paving?”
The short answer is yes you can. But there are some conditions. Pressure washing is a good way of keeping your block paving in great condition,
but if you do it incorrectly, or too frequently, you can damage your paving and ruin your driveway. The high pressure can disrupt the
block paving bed surface, as well as the joining material which can cause your blocks to crack or come loose.
Tips For Using a Pressure Washer on Your Block Paving.
It’s a good idea to sweep any loose debris and dirt off your driveway before you start with the pressure washer.
First use a high qaulity cleaning solution to loosten any dirt and grim.
have your pressure washer on a low setting and keep it at a 30 degree angle and dont have the end of the lance to close to prevent the force of the water from damaging your block paving.
Do not spend too long on individual blocks; adopt more of a sweeping motion to ensure the water isn’t concentrated in one place for to long.
You should be able to get your block paving nice and clean without the need of agressive pressure.try and adjust your nozzle to a fan of water rather than a pointed jet to prevent damage.
Pressure washers should only be used occasionally. Too much use will eventually result in damage to your driveway.